Our Danuser equipment includes mixing buckets, post drivers, and tree pullers.
Danuser Mega Mixer S75
The Danuser Mega Mixer S75 has a 3/4-cubic-yard base capacity and an 8-inch-diameter, 70-inch-long auger. An optional hopper extension raises capacity to 1 cubic yard. At 25 GPM, Danuser rates the dispense time at 26 seconds and limits the attachment to 25 GPM and 3,500 PSI; material, moisture, load, and the carrier's hydraulic system affect operation.
The S75 handles concrete with aggregate up to one inch, mortar, grout, feed, sand, clean rock up to one inch, dry topsoil, sawdust, compost, manure, and asphalt.
Danuser Hammer SM40 Post Drivers
The Hammer SM40 is a free-fall post driver without springs, hydraulic cylinders, or return lines. The standard machine uses a 300-pound drop weight and 40-inch stroke and reaches a maximum of 35 strokes per minute. It requires 1,500 to 3,000 PSI and 12 to 30 GPM, but can operate below 12 GPM at a lower stroke rate.
We offer a Danuser Hammer SM40 base post driver and the Danuser SM40 with grapple and tilt. The grapple-and-tilt model uses the standard 300-pound hammer, and its tilt provides up to 20 degrees of adjustment left or right.
Danuser Intimidator
The Danuser Intimidator tree puller has a 34-inch maximum jaw opening and a manufacturer-rated maximum cylinder force of 21,000 pounds. For base part 12200, Danuser specifies a maximum continuous pressure of 3,500 PSI and no minimum hydraulic flow. Confirm the carrier mount, couplers, auxiliary circuit, lift capacity, and selected jaw style.
Email sales@keastenterprises.com with the carrier model, mount, auxiliary hydraulic pressure and flow, and the work you need the attachment to perform.
