Stump Grinders

We sell stump-removal attachments from Baumalight and Fecon for three-point tractors, mini skid steers, skid steers, UTVs, and excavators. The cutting systems include high-speed rotors and wheels, a low-speed stump planer, and Fecon's auger-style STUMPEX.

Three-Point PTO Stump Grinders

Model Cutting System Power and Mount Positioning
Baumalight 1P24 24-in. rotor; 34 S1000 carbide teeth 540 PTO; Category I; 20-45 recommended tractor hp Carrier positioning; no hydraulic remotes
Baumalight 3P24 24-in. rotor; 34 teeth 25-55 recommended tractor hp; one or two remotes 65-in. swing

Mini-Skid, Skid-Steer, and Excavator Rotor Grinders

The Baumalight S14 mini-skid stump grinder has an 18-inch rotor with 12 high-speed teeth, 6 inches of depth, and 12 inches of horizontal movement. Couplers are included.

The Baumalight S18 has a 24-inch rotor with 34 planer teeth, reaches 10 inches deep, and provides 22 inches of horizontal movement. The Baumalight S24 has a 24-inch rotor with 34 teeth and 60 inches of hydraulic swing; it also requires a 12-volt supply with at least 10 amps. Couplers are not supplied with either model.

The Baumalight GXM350 excavator stump grinder uses an excavator-mounted rotor with hydraulic motor choices based on carrier flow.

Low-Speed Planer and Auger-Style Stump Removal

The Baumalight RSS380 stump planer is a low-rpm planer rather than a conventional high-speed wheel grinder. Recommended hydraulic flow is 20-40 GPM at 2,500-3,000 PSI, with listed maximums of 45 GPM and 3,500 PSI. The planer also has a 5,000-pound maximum carrier-weight limit.

The Fecon SHX33SX STUMPEX uses a 32-inch low-speed bit at 7-16 rpm. It requires 20-42 GPM, has a 4,250 PSI maximum, and weighs 1,368 pounds. Fecon states that the bit draws into 8- to 28-inch stumps up to 20 inches deep in one pass, with additional passes for larger stumps.

Fecon FST280 Wheel Stump Grinder

The Fecon FST280 Stumper has a 28-inch cutting diameter, 8-inch depth per pass, 650-pound attachment weight, 13 cutting tools, and a 4,100 PSI maximum. Standard-flow configurations use 12-25 GPM, while high-flow configurations use 25-45 GPM. Fecon offers mounts for excavators, UTVs, and mini or standard skid steers.

Stump Grinder Purchasing Information

To purchase a stump grinder, email sales@keastenterprises.com with the carrier make and model, mount, and rated operating capacity or tractor weight. Include the PTO horsepower and speed or hydraulic flow and pressure, remotes, electrical supply, stump diameter, below-grade depth, and site access. You can reserve equipment online; contact us about nationwide delivery, financing, or a trade-in for the grinder.