Baumalight CF360 Skid Steer Rotary Brush Cutter, 60" Cut

Overview

The Baumalight CF360 Skid Steer Rotary Brush Cutter is a heavy-duty standard-flow mower for clearing brush, saplings, and small trees with a 60" cutting width and 70" overall path. A rugged 1/4" steel deck and reinforced frame house two AR400 slasher blades designed to take the abuse of fenceline work, pasture edges, and reclaiming overgrown ground.

Set up with the M550 motor (other motors available), the CF360 is matched to standard-flow skid steers needing a serious cutter without going to high flow. The M550 motor is rated for roughly 12–30 GPM, recommends but does not require a case drain, making plumbing simple on a wide range of machines. A built-in 3,000 psi relief valve protects your skid steer and the cutter’s driveline from pressure spikes when you hit stumps or rocks, while the front push bar and rear chain curtain help control debris and material flow.

Key Features

60" Open-Front Cut with 70" Path Width
60" cutting width and approximately 70" overall path let you cover just beyond most skid steer tire or track width, making it easy to trim right to fences, treelines, and field edges in fewer passes.

Two AR400 Slasher Blades
The cutter uses two heavy AR400 steel blades whose thin, reversible profile keeps a sharp edge in tough brush. The AR400 alloy resists bending and wear when you’re working in rocky or rough conditions.

Rugged 1/4" Steel Deck & Frame
A 1/4" plate steel deck and heavy, boxed-in frame are built to stand up to bouncing over rough terrain while cutting trees, saplings, and thick weeds, without folding or oil-canning over time.

M550 Standard-Flow Motor
Equipped with the M550 hydraulic motor, the CF360 runs on approximately 12–30 GPM standard-flow hydraulics and does not require a case drain, but one is recommended, simplifying hookup on many skid steers.

Built-In Hydraulic Relief Protection
A factory 3,000 psi relief valve is built into the system to disengage the driveline if hydraulic pressure spikes, helping protect both the cutter and your skid steer from sudden shock loads.

Open Front with Push Bar & Rear Chain Curtain
Open-front mouth and a welded push bar let brush feed easily into the blades while helping push over small trees. A heavy rear chain curtain helps contain flying debris while allowing chopped material to discharge.

Standard Skid Steer Quick-Attach Plate
Universal skid steer quick-attach plate fits most SSL/CTL carriers in the roughly 4,000–10,500 lb range, giving broad compatibility with construction and farm machines.

Up to ~4" Brush and Saplings
Rated for brush and saplings up to about 4" in diameter (material and conditions dependent), making it a good fit for pasture cleanup, lanes, building sites, and reclaiming overgrown fencerows.

Technical Specifications