Collection: Auger Drives

Belltec LC-series hydraulic auger drives cover mini skid-steer and full-size skid-steer carriers. Both drives use a 2-inch hex output. Confirm that the drive and mount fit the carrier and that the auger or extension has the correct 2-inch hex connection.

Carrier and Hydraulic Requirements

Confirm the carrier make and model, quick-attach interface, auxiliary hydraulic flow, and hydraulic pressure before ordering. Belltec rates both drives at 3,000 PSI maximum continuous pressure and 3,500 PSI maximum intermittent pressure. The mount, hoses, and couplers must match the carrier.

LC-150 and LC-300 Operating Limits

• Belltec LC-150 mini skid-steer auger drive kit: 6-15 GPM, 18-inch maximum dirt or rock auger diameter, and theoretical maximums of 1,764 ft-lb at 3,500 PSI and 91 RPM at 15 GPM.
• Belltec LC-300 skid-steer auger drive kit: 15-30 GPM, 36-inch maximum dirt or rock auger diameter, and theoretical maximums of 2,929 ft-lb at 3,500 PSI and 110 RPM at 30 GPM.

Actual performance may vary from these theoretical maximums. Confirm the auger or extension coupler and pinning arrangement rather than assuming every 2-inch hex tool connects directly.

Fitment Assistance

Email sales@keastenterprises.com with the carrier make and model, auxiliary flow, pressure, and mount interface. We will help determine which drive, mount, coupler, and auger connection fit.