Belltec LC-300 Auger Drive Kit, Skid Steer Plate, 2″ Hex, 15–30 GPM, 96″ Hose Kit

The Belltec LC-300 is a planetary hydraulic auger drive for skid steers and compact track loaders. This kit pairs the drive with a QT-100 universal skid steer mount and a 96-inch hydraulic hose kit. Auger bits and extensions are sold separately.

Belltec LC-300 Auger Drive Kit

The LC-300 operates within a 15-30 GPM auxiliary-flow range and uses a 2-inch hex output shaft. Belltec publishes a maximum continuous pressure of 3,000 PSI and an intermittent rating of 3,500 PSI. At the maximum published flow and pressure, theoretical output is 110 RPM and 2,929 ft-lb; actual drilling performance depends on carrier hydraulics, bit diameter, soil or rock conditions, and operator technique.

Belltec LC-300 Specifications

Carrier and Auger Matching

Confirm the carrier make and model, auxiliary flow and pressure, coupler size, hose routing, mount interface, rated operating capacity, and any case-drain requirement. Select the auger diameter and tooth style for the material being drilled, then verify that the bit and any extension use the same 2-inch hex connection as the drive.

Are auger bits included?

No. The LC-300 kit includes the drive, mount, and hydraulic hoses. Auger bits and extensions are selected separately for the required diameter, depth, and ground conditions.

What warranty applies to the LC-Series drive?

Belltec's current warranty policy lists a five-year limited warranty for LC-Series hydraulic auger drives. Manufacturer terms, exclusions, and claim procedures apply.

Related Equipment

• Auger Drives
• Belltec Equipment